Skip to content

Careful window and gutter cleaning. Get your quote at (843) 891-6337

(843) 891-6337

ServicesScreen Cleaning & Repair

Window Screen Cleaning & Repair in Moncks Corner

Dirty screens dull clean glass, and a small tear lets every mosquito in. We wash screens by hand, rescreen torn mesh, renew cracked spline and straighten bent frames. Most screens can be saved, and we will tell you plainly when one can't.

Worker in a navy cap and T-shirt scrubbing a removed window screen with a brush, more screens leaned against a brick house beside a concrete driveway

Most screens need fixing, not replacing

A window screen is a simple part: a roll-formed aluminum frame, four corner keys, a sheet of mesh and a rubber spline that locks the mesh into a channel. When one of those parts fails, the rest is usually fine. A torn sheet of fiberglass mesh or a spline that has gone hard and shrunk from sun exposure is a straightforward rescreen, not a reason to buy a new screen.

Cleaning matters as much as repair. Spring pine pollen and summer humidity leave a yellow-green film in the weave that holds moisture and feeds mildew. That film blocks airflow and makes freshly cleaned windows look hazy from inside. We wash it out with soft brushes and a mild detergent, rinse with low pressure so the mesh doesn't bulge, and let each screen dry fully. Only then does it go back in the window.

When a frame is cracked at a corner, badly kinked, or the wrong size for the opening, we say so and explain why repair won't hold. That's the only time we recommend a new frame.

What screen service includes

Hand washing of every screen
We pull each screen, brush both sides of the mesh and rinse it at low pressure. High-pressure spray stretches fiberglass mesh and can pop it out of the spline channel, so we don't use it.
Rescreening torn or sagging mesh
We strip the old mesh and spline, roll in new screening with a spline roller and trim it flush. You can choose standard fiberglass, stiffer aluminum mesh, or heavier pet-resistant mesh for doors and low windows where claws are a problem.
New spline, sized to the channel
Old vinyl spline hardens and shrinks, which lets the mesh pull loose at the edges. We match the spline diameter to the frame channel so the new mesh sits tight and stays tight.
Frame straightening and hardware
We straighten mild bends, swap cracked corner keys, and fit missing pull tabs or tension springs so the screen seats properly and comes out easily next time.
Careful reinstallation
Each screen goes back in the window it came from, oriented the way it was made to fit. We check that it sits square with no gaps at the sides where insects get through.

Signs your screens need attention

  • Hazy view through clean glass

    If the window looks dirty even after washing, the film is often in the screen, not on the glass. Pollen and dust packed into the weave scatter light.

  • Small holes and pulled corners

    A pinhole spreads as the mesh flexes in the wind. Catching it early means a simple rescreen while the damage is still small, not a tear running across the whole panel.

  • Mesh bulging or loose at the edges

    Bulging usually means the spline has shrunk or cracked. The mesh is no longer gripped, and it will keep sagging until it gets new spline.

  • Screens that won't stay in

    A bent frame or a missing tension spring lets a screen rattle or fall out. Both are inexpensive parts to fix.

  • Dark spotting on the mesh

    Black or green speckling in the weave is mildew. It grows fast in humid months and spreads to sills if left alone.

What affects the price

Screen work is priced per screen, so the count is the starting point. From there, the price depends on how much each screen needs and how easy it is to reach. You get the full breakdown by phone before we schedule.

Number and size of screens

More screens take more time, and large patio or door screens use more mesh and spline than a standard window screen.

Cleaning only or repair

A wash is quicker than a rescreen. New spline and frame work each add time and materials.

Type of mesh

Standard fiberglass is the most economical. Aluminum and pet-resistant mesh cost more and take longer to install neatly.

Access

Second-story screens that must be removed from inside, or windows behind dense shrubs, take longer than ground-floor screens that pop out from outside.

How a screen visit runs

  1. 1

    Talk it over by phone

    Tell us how many screens you have, roughly what sizes, and what is wrong with them. That gives us enough to quote the job and bring the right mesh and spline.

  2. 2

    Inspect and label

    On the day, we remove each screen, label it to its window and check the mesh, spline, corners and frame. If a screen needs repair, we show you the problem before we start.

  3. 3

    Wash, repair and dry

    Screens are washed and rinsed outside on a clean surface. Repairs happen on site with the old mesh and spline bagged as we go, and every screen air-dries completely.

  4. 4

    Reinstall and walk through

    We put every screen back, check the fit, and walk you through anything we found, including any frame we think is past repairing and why.

Window cleaning technician in a navy shirt kneels beside a homeowner, pointing out hard-water spots on a window of a brick house, with a ladder, bucket and tools nearby

Screen cleaning and repair questions

Can you fix a screen with a small tear, or does the whole panel need new mesh?

We put a full new sheet of mesh in that frame. Patches look obvious and tend to come loose around the edges. A full rescreen reuses your existing frame, so it is still repair, not replacement.

When do you recommend a new frame instead of a repair?

When a corner is cracked through the aluminum, the frame is kinked so it won't sit square, or the frame was never the right size for the opening. In those cases new mesh would sit in a frame that still leaks insects, and we will explain that before you decide.

Will washing damage older screens?

Not the way we do it. We use soft brushes and low-pressure rinsing because high pressure is what stretches mesh and loosens spline. If a screen is already brittle, we tell you first and let you choose.

Should I have screens cleaned at the same time as my windows?

It makes sense, because clean glass behind a dirty screen still looks hazy. We can pair this with residential window cleaning and window track and sill cleaning in one visit. Window cleaning comes with our 7-day rain guarantee.

Who covers it if a screen or something on my house gets damaged during the visit?

We do. Our company is licensed, and we are also bonded and insured. Screen work means ladders leaning on siding and frames going in and out of openings, so that coverage keeps the risk on our side rather than yours.

Get your screens back in working order

Count your screens, note which ones are torn or loose, and give us a call. We will tell you what needs cleaning, what needs repair and what it will cost.